How to Clone a Hard Drive Using Norton Ghost

Or a simple mechanical failure or a malicious virus can damage the hard drive or stop working. If you want to back up your hard drive, you can use Norton Ghost to clone the entire contents of the program to run again.








Instructions


First, Connect an external hard drive to any available USB port on your computer, or shut down your computer if you want to clone the first hard drive to a second internal hard drive.

Secind, Disconnect the cables from the back of the computer case. Solve the case of the left side of the top panel. Use a screwdriver to remove the screws on the top and bottom boxes. Press the front panel and slide completely out of the box.

Third, Enter the internal hard disk is an open slot in your computer. Connect a SATA hard disk on the new hard drive and replace the screws that hold the unit in place. Press the plastic clips on hard behind the bridge "slave."


Fourth, Replace the screws. Connect the cables in the box and turn on the computer. Wait until the operating system to finish loading the end of each program you use, including anti-virus anti-spyware and firewall.


Fifth, Open the Norton Ghost program by double-clicking its icon on your desktop. Click "Advanced" and click on "Clone".


Sixth, Select the location of the first hard drive you want to clone the left menu. Choose a location for a new hard drive from the dropdown menu on the right.


And the Last, Click "Next" and then "Run" to clone hard drive for the first time in a second hard drive.


     Download Norton Ghost 14 Now!!!